Safe Access All Areas

01920 463 230
Howe Green 1050 Series heavy duty stainless steel floor access cover product image
Floor Access Cover
1050 Series Heavy-Duty Floor Access Covers

The class-leading Howe Green 1050 Series Heavy-Duty Floor Access Covers are suitable for all use with thicker and hard-wearing floor finishes to enable permanent, safe access to services concealed underneath.

The 1050 Series is available in single, duct or multipart configurations for use in interior or exterior areas, with 6.5 tonne pneumatic tyre wheel load, FACTA C supplied as standard or up to 11.5 tonne pneumatic tyre wheel load, FACTA D (equivalent to D400) available on request. Manufactured in the UK and third party CERTIFIRE fire rated to BS 476 Part 22, all covers are made to your exact specification with no time or cost constraint.

Certify Certification Logo

Howe Green | 1050 Series

Features / Benefits

Made to your specification between stated maximum and minimum sizes, with no time or cost constraint.

Quick and easy to install ensuring minimum disruption.

Provides easy access to underfloor services using lifting keys.

Any configuration of ducts and branches can be created to provide a tailor-made floor access solution.

Third party CERTIFIRE fire rated to BS 476 Part 22 for stainless steel covers. Fire rated for 2 hours on integrity, and up to 2 hours on insulation depending on the floor access cover fill specification.

Load rating 6.5 tonnes FACTA C supplied as standard or 11.5 tonnes FACTA D (equivalent to D400) available on request, to meet project requirements.

Double sealed option provides the highest levels of hygiene and security.

TYPICAL FLOOR FINISHES

All types of hard floor finish - ceramic tiles, marble, terrazzo, concrete, resin, wood or parquet floors.

PERFORMANCE

Heavy-duty, suitable for up to  11.5 tonne pneumatic tyre wheel load.

Load rating 6.5 tonnes FACTA C supplied as standard or 11.5 tonnes FACTA D (equivalent to D400) available on request, to meet project requirements.

If heavier loading required, please contact the office on 01920 463230.

FIRE RATING

The 1050 Series is third party CERTIFIRE tested and fire rated to BS 476 Part 22 for 2 hours on integrity in the case of a fire. This specification is for the use of the cover in a dead load environment only. If any permanent loads are applied this will invalidate the fire rating. CERTIFIRE certificate no. CF5967 

SINGLE: maximum size 1030 mm x 1030 mm, clear opening 900 mm x 900 mm

DUCT: maximum width 1030 mm, clear opening 900 mm with an unlimited duct run length

  • With full C40 concrete infill: fire rated for 2 hours on integrity and 2 hours for insulation
  • With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

MULTIPART: maximum size 4m x 3m overall  

  • With full C40 concrete infill: fire rated for 2 hours on integrity and 1 hour for insulation
  • With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

*any floor access covers outside of the maximum sizes shown above will not be covered by our fire ratings*

SUITABILITY

The 1050 Series Floor Access Cover from Howe Green is the first choice for demanding external and internal environments subject to heavy pedestrian or vehicular traffic where the emphasis on creating an attractive public realm is at the heart of the development and easy access is required to concealed underfloor services.

External and internal areas that require a Floor Access Cover with a deeper capacity to accommodate a thicker floor covering, such as granite.

The use of support beams and cross members enables complex designs to be manufactured to accommodate situations where a non-standard access solution is required.

MANUFACTURED TO REQUIREMENT

We manufacture Floor Access Covers, Edge Trims and Corner Guards quickly and easily to your exact size/configuration or special purpose requirements using CAD and C.N.C machinery at our manufacturing facility in the West Midlands.

Performance Standards Howe Green | 1050 Series

SUITABILITY Interior and exterior solid floors
LOADING Up to 6.5 tonne pneumatic tyre wheel load (FACTA C) as standard or up to 11.5 tonne pneumatic tyre wheel load (FACTA D, equivalent to D400) on request
WEIGHT 220 kg/m² for FACTA C load rating
SEAL Optional Double Seal
FIRE RATING Third party CERTIFIRE fire rated to BS 476 Part 22 for integrity and insulation. Certificate No. CF5967

Guide Specification Howe Green | 1050 Series

MATERIALSStainless Steel with Steel baseplate and reinforcement
CLEAR OPENING(Min-Max sizes) SINGLE: 150-900mm / DUCT: 100-900mm / MULTIPART: contact us*
FRAME SIZE(Overall dimensions) Stainless Steel: clear opening plus 130mm
DEPTHOverall depth 105mm
LIFTING POINTSCorner as Standard (Inset/Barrel lifting points optional)
FIRE RATINGBS 476 – Part 22 for integrity and insulation (see FIRE RATING Notes)
*NotesDue to the potentially complex design of multipart access cover layouts, Howe Green recommend early consultation with our Technical Department to achieve the most efficient and economical layout for the given installation.

More info? Place an order? Get in touch today

Call us on 01920 463230 or email us >

Projects

1050 Series Heavy Duty Floor Access Cover

John Moores University, Liverpool

Feedback

Also interested in Roof Access products?
Visit Bilco UK website >

Also interested in Riser doors or wall and ceiling Access products?
Visit Profab Access website >