HSE 75 - Medium Duty Aluminium and Stainless Steel Hinged Access Hatch/Cover
Aluminium and stainless steel hinged floor access hatch/cover for hard floors to give easy, safe access to concealed services in areas where a heavier loading combined with the need for regular access is required and Health and Safety is paramount.
"Love dealing with Howe Green - they care about their products, their quality, their service AND their clients.
Howe Green never let you down - and neither do their access covers!"
Andy Masters
Director - DMC Group
Typical Floor Finishes
All types of hard floor finish - ceramic tiles, marble, terrazzo, concrete, resin, wood or parquet floors.
Performance
Medium duty, suitable for up to 5 tonne pneumatic tyre wheel load – cars and light delivery vehicles.
Typical applications
Hinged aluminium floor access cover for use in:
Basement areas and plant rooms that require regular access for maintenance of concealed services.
Public buildings, such as railway stations, where regular access is required and Health and Safety of employees and the general public is paramount.
Aluminium covers suitable for Swimming pools and other “wet” areas where access to plant and equipment is required on a regular basis.
Any situation where regular access to concealed services is required.
Products Available / Specifications
HSE 75 Series - Hinged Single/Duct Access Hatch/Cover - Aluminium
Size
Maximum size 1000 mm x 1000 mm clear opening
Minimum size 550 mm x 550 mm clear opening
Overall frame size clear opening plus 130 mm*
Example: 600 mm x 900 mm clear opening equates to 730 mm x 1030 mm overall frame size
Overall depth 75 mm
Weight:
A HSE 75 Series access hatch when filled and installed correctly will require a maximum force of 20 kg to open.
Materials
Show edge manufactured from aluminium with steel baseplate and reinforcements.
Options
- Underside release latch.
- Double seal.
- 3 hour fire rating to BS 476: Part 20: 1987 for single, 2 hour fire rating to BS 476: Part 20: 1987 for duct and other variations.
HSE 75 Series - Hinged Hatch - Single/Duct Access Cover - Stainless Steel
Size
Maximum size 1000 mm x 1000 mm clear opening
Minimum size 550 mm x 550 mm clear opening
Overall frame size clear opening plus 147 mm*
Example: 600 mm x 900 mm clear opening equates to 747 mm x 1047 mm overall frame size
Overall depth 75 mm
Weight:
A HSE 75 Series stainless steel access hatch when filled and installed correctly will require a maximum force of 20 kg to open.
Materials
Show edge manufactured from stainless steel with steel baseplate and reinforcements.
Options
- Underside release latch.
- Double seal.
- 3 hour fire rating to BS 476: Part 20: 1987 for single, 2 hour fire rating to BS 476: Part 20: 1987 for duct and other variations.
