1050 Series - Heavy Duty Stainless Steel Access Covers
A heavy duty stainless steel floor access cover for internal and external hard floor finishes where
a deeper capacity for a thicker floor covering and heavier duty loading is required.
"We would recommend the use of the Howe Green Access covers for the infill of Terrazzo / Marble / Granite / Limestone / Marghestone / Veronastone / Arenastone. We believe that Howe Green products represent the "Rolls Royce" of access cover and frames, we have never had a problem with them in all the years they have been in manufacture. Great Product (I have been in the trade for some 48 years)."
Zanetti & Company - Bristol
Typical Floor Finishes
Suitable for all types of hard floor finishes including external grade paving slabs such as granite and concrete.
Performance
Heavy duty, up to 6.5 tonne pneumatic tyre wheel load (C250).
Typical applications
The 1050 Series Stainless Steel access cover is for use in:
Demanding external and internal environments subject to heavy pedestrian traffic/vehicular traffic where the emphasis on creating an attractive public realm is at the heart of the development and easy access is required to concealed services.
External and internal areas that require a floor access cover with a deeper capacity to accommodate a thicker floor covering, such as granite.
The use of support beams and cross members enables complex designs to be manufactured to accommodate situations where a non-standard access solution is required.
Products Available / Specifications
1050 Series - Single Access Cover - Stainless Steel
Size
Maximum size 900 mm x 900 mm clear opening
Minimum size 150 mm x 150 mm clear opening
Overall frame size clear opening plus 130 mm*
Example: 600 mm x 900 mm clear opening equates to 730 mm x 1030 mm overall frame size
Overall depth: 105 mm
Weight: 220 Kg/m2 **
Materials
Stainless steel with steel base plate and reinforcement.
Options
- Double seal.
- Inset lifting points.
1050 Series - Duct Cover - Stainless Steel
Size
Maximum clear opening 900 mm
Minimum clear opening 150 mm
Overall frame size clear opening plus 130 mm*
Example: 550 mm x 900 mm clear opening equates to 680 mm x 1030 mm overall frame size
Overall depth: 105 mm
Weight: 220 Kg/m2 **
Materials
Stainless steel with steel baseplate and reinforcement.
Options
- Double seal.
- Inset lifting points.
1050 Series - Multipart Cover - Stainless Steel
Size
Due to the potentially complex design of stainless steel multipart access cover layouts Howe Green recommend early consultation with our Technical Department to achieve the optimum and most economical layout for the given installation.
Overall depth: 105 mm
Weight: 220 Kg/m2 **
Materials
Show edge manufactured from stainless steel with steel baseplate and reinforcement.
Options
- Double seal.
- Inset lifting points.
